In Stock
- Engine Power
- 72kw/97hp
- Operating Weight
- 8200 mm
- Bucket Capacity
- 1,0 m bucket
Less fuel consumption results in lower engine emissions
The 4.5 litre turbocharged engines for the new machines are provided by FPT Industrial, a world-wide leader in the design, production and sale of powertrains for industrial applications, supplying among others Fiat Industrial brands such as New Holland Construction and Iveco.The Variable Displacement Pump hydraulic system is standard on B100B and above ,contributing to a 10% to a 10% fuel saving and a rapid return on investment.
Low noise levels for urban jobsites
Reduced emission Tier III engine. Low external noise levels. New Holland CB90S is a silenced hydraulic breaker especially designed for TLB use Rubber pads under the stabilizers reduce ground damage in sensitive operating conditions
Just like a wheel loader!
Maximize bucket filling with Powershift transmission and standard kick down function .Easy leveling thanks to loader float function controlled from the joystick.Shorter cycle times thanks to Automatic Return-to-dig button. No loader arm bounce and increased bucket retention with optional Glide Ride. Excellent traction in the worst conditions thanks to a 100% lockable differential, or a limited slip differential on the B115B.
Smooth control under load with powershift
Available on B110B and B115B, the Powershift transmission provides maximum operator comfort. In "full automatic mode" the transmission will auto-shift either up or down the gears, depending on speed and load, improving cycle times and simplifying road travel. For less sophistication, you can opt for our robust PowerShuttle transmission that is available on all models. It is the standard transmission on B90B and B100B.
Central service point location
Daily check and fill points are accessible from ground level for time saving. On the machine’s left side, just above the fuel tank, you can easily reach: The hydraulic pressure check points, Steering circuit, Pilot control.All grouped together for time and cost reduction whilst improving efficiency, durability and performance.
| Cab | Factory Air Conditioning | |
| Enclosed Cab, CD stereo, Fire Extinguisher | ||
| Suspension seat with seat belt | ||
| Tilt Steering | ||
| Key start switch with electric fuel shut off | ||
| Engine: | 95hp / 71Kw Turbo-charged, 4-cylinder, Tier III, Diesel | |
| Transmission: | Power Shuttle 4x4 - (4 forward and 4 reverse gear) | |
| Warning Lights, Gauges | Oil temperature gauge | |
| And Buzzers: | Fuel gauge | |
| Engine hours, engine rpm and system voltage | ||
| Alternator: | 90 amp | |
| Battery Type: | 12 volt, 95 amp hr | |
| Brakes - | Wet Multi-discs x 8 per axle (x 4 per half axle) | |
| Parking Type: Single disc on driveline | ||
| Steering: | Power steering type - hydrostatic | |
| Pump Type: | Gear | |
| Rear Axle: | Differential Lock | |
| Hydraulic System - | Twin gear pump:Hydraulic system and priority steering system | |
| Tyres (Tubeless): | Rear - 18.4 x 26 12ply R4 Goodyear | |
| Front - 12.5 x 80 x 18 Goodyear | ||
| Front Loader: | 1.0 cu m (1.30 cu yd) 6 in 1 bucket multi purpose | |
| Overall operating height: | 14 ft.(4,284mm) | |
| Lift capacity at Maximum height: | 6,817lbs (3,092kg) | |
| Maximum bucket breakout force | 13,353 lbs (6,057kg) | |
| Backhoe with side shift/extended HED dipper& Plumbing for hydraulic: | Retracted | Extended |
| Operating height fully raised: | 5,608mm (18ft 5in) | 6,276mm (20f 7in) |
| Reach from swing post: | 5,320mm (17ft 5 in) | 6,273mm (20ft 7 in) |
| Maximum digging depth: | 4,518mm (14ft 10in) | 5,555mm (18ft 3in) |
| Fixed length bucket digging force: | 5,712mm (12,592 lbs) | 5,712mm (12,592lbs) |
| Crowd Digging Force: | 3,521mm (7,763lbs) | 2,556mm (5,636lbs) |
| Rear bucket size: | 12 in & 24 in |
Enquiry
related products
